New compacting press concept for even better performance.
Electrical driven CNC controlled multilevel press with three upper and lower levels
The constant high quality of our products is of primary importance. We only use raw materials supplied with quality certificates according to well defined ISO standards. We have a fully equipped laboratory to make all tests during the various stages of production. 25 years of experience allow us to produce a wide range of Tungsten Carbide ensuring metallurgical characteristics always reliable.
10CNC AXIS Side compaction or pressing of cross holes
NEW!!! SIDE COMPACTION AND CROSS HOLES OPEN UP NEW PM PART DESIGNS
Advanced pressing options offered by our new electrical press, which now include side compaction or the pressing of cross holes.
Powder compacting press with electrical only drives, which combine the rigidity and productivity of mechanical press with a very high precision.
We produce with servo-motorised CNC powder press with closed-loop control systems that is the state-of-the-art in powder compaction technology. This sophisticated press can, for example, provide a maximum in full version of eighteen closed-loop controller systems for powder compaction. These can be six top and six bottom levels each, plus the top punch, the die and the core rod. In addition, the filler movement is closed-loop controller for optimised powder filling.
Each drive motor is equiped with its own measuring system; the closed-loop control is carried out individually and directly on the active axis. This is said to eliminate any inaccuracies resulting from indirect measuring.
The positioning and repeating accuracy of the press axes is said to be +-0,001mm and, therefore, easily meets today’s requirements for the tolerances of PM compacts.
GRADES | N/mm² | N/mm² | |||||||||||||||||
Co | Tic | TaC | WC | Grain size | Density | Hv30 | HRA | Trans. rup. | Co | Tic | TaC | WC | Grain size | Density | Hv30 | HRA | Trans. rup. | ||
K01 | 3,0 | 97,0 | sub-micron | 15,25 | 2025 | 94,1 | 2100 | G1 | 6,5 | 93,5 | medium-fine | 14,80 | 1630 | 92,2 | 2500 | ||||
K05 | 4,0 | 96,0 | sub-micron | 15,18 | 1820 | 93,1 | 2200 | G2 | 12,0 | 88,0 | medium | 14,30 |
1240 | 88,8 | 3000 | ||||
K10 | 6,50 | 93,5 | fine | 14,75 | 1750 | 92,8 | 2300 | G3 | 15,0 | 85,0 | coarse | 14,00 | 1100 | 87,4 | 3100 | ||||
K20 | 7,0 | 93,0 | fine | 14,50 | 1665 | 92,3 | 2500 | G4 | 20,0 | 80,0 | coarse | 13,50 | 1040 | 86,6 | 3200 | ||||
K22 | 10,0 | 0,5 | 89,5 | fine | 14,30 | 1600 | 92,0 | 3600 | G5 | 25,0 | 75,0 | coarse | 13,15 | 810 | 83,2 | 3200 | |||
K22-S | 10,0 | 0,5 | 89,5 | sub-micron | 14,20 | 1630 | 92,2 | 4100 | G6 | 28,0 | 72,0 | coarse | 12,90 | 750 | 82,5 | 3200 | |||
K30 | 8,5 | 91,5 | medium-fine | 14,40 | 1435 | 90,7 | 2600 | M2 | 9,0 | 91,0 | coarse | 14,60 | 1215 | 88,4 | 2700 | ||||
K40 | 12,0 | 88,0 | fine | 14,10 | 1345 | 89,9 | 2800 | P10 | 9,8 | 19,0 | 19,5 | 51,7 | medium-fine | 10,20 | 1530 | 91,6 | 1460 | ||
K40-S | 12,0 | 88,0 | sub-micron | 14,05 | 1600 | 92,0 | 4400 | P25 | 9,0 | 7,5 | 5,0 | 78,5 | medium-fine | 12,55 | 1450 | 90,9 | 1800 | ||
K45 | 15,0 | 85,0 | medium | 14,00 | 1190 | 88,3 | 3100 | P35 | 11,4 | 6,4 | 8,0 | 74,2 | medium | 12,50 | 1400 | 90,4 | 2000 | ||
K50 | 15,0 | 85,0 | fine | 14,00 | 1300 | 89,5 | 3000 | P6 | 11,0 | 4,0 | 8,0 | 77,0 | medium-fine | 13,10 | 1380 | 90,0 | 2080 | ||
K60 | 20,0 | 80,0 | fine | 13,50 | 1160 | 88,0 | 3200 | Other special grades ready to press are available on request |